Radio bridge in production?

Question

Computer networks

There is now - Office area with a server room, where everything works according to the standard
From the server room there is a cable to the production building, about 100 meters, in this building there are 4 switches to decouple the network inside the building.
There are also various buildings nearby, but you can’t pull the wire there, because. construction work is still going on and equipment is traveling (no way to pull the cable through the air), underground - also not an option. I
read about the radio bridge here,
so the question is, if I install a radio bridge from the production building to a nearby building, can I deploy a LAN there? those. install switch

Answer 1

Look also in this direction
www.ubnt.su/ubiquiti/nanostation-m5.htm

Answer 2

Can ubiquinty nanostation

Answer 3

Ubiquinty - need 2 pcs. (works up to 15 km + PoE). If the frequency of 2.4 is noisy, then 5 GHz is better. It is configured as a client-server and a bridge (bridge) forwards DHCP. After setting, make the SSID invisible. But keep in mind that this is Wi-Fi. Mikrotik is also possible, but this is SOHO. (Small office/home office).

Answer 4

The main condition is that the buildings are in direct line of sight
A pair of directed Ubiquinty for each link, well, or if the buildings are in the same plane, then you can sector
and from them further breed to arbitrarily switches
Before buying, it is advisable to at least conduct an approximate radio survey by phone

Answer 5

Read about TP-LINK CPE210 punches up to 4 km in a straight line