Problem with nomodeset, Kali Linux 20.4 why only the first run is loaded?

Question

linux

there is a laptop worth core2duo, vidyuha radeon HD3470
did not get up on this laptop, not a single distribution kit except 20.4
, I have been struggling with this problem for 4 days. so I decided to ask the experts, because in Google there is no solution other than how to prescribe nomodeset
tried different shells - it doesn’t help, I stopped at xfce. The system has already been reinstalled 10 times. The
problem is actually this.
the installation goes well,
the system starts up the FIRST TIME everything works as it should, the video drivers are determined by all the buzzing.
but after switching to standby / hibernation mode, the computer then does not turn on the monitor, judging by the cooler, it starts up
after a reboot, and the login window does not load. black screen.
I tried everything in different ways from Google via ctr + alt + f1, starting the terminal to do something, nothing helped. even apt-get update etc didn't help.
helps only to add to GRUB nomodeset. but it's impossible to work like that, wrong resolution, gdaza get tired
of the actual question. why the bare system works properly only at the first start.
and how to overcome all the same this fucking nomodeset.

here can someone help info on the driver

┌──(kali㉿kali)-[~]
└─$ modinfo radeon 
filename:       /lib/modules/5.9.0-kali1-amd64/kernel/drivers/gpu/drm/radeon/radeon.ko
license:        GPL and additional rights
description:    ATI Radeon
author:         Gareth Hughes, Keith Whitwell, others.

depends:        drm,drm_kms_helper,ttm,i2c-algo-bit
retpoline:      Y
intree:         Y
name:           radeon
vermagic:       5.9.0-kali1-amd64 SMP mod_unload modversions 
parm:           no_wb:Disable AGP writeback for scratch registers (int)
parm:           modeset:Disable/Enable modesetting (int)
parm:           dynclks:Disable/Enable dynamic clocks (int)
parm:           r4xx_atom:Enable ATOMBIOS modesetting for R4xx (int)
parm:           vramlimit:Restrict VRAM for testing, in megabytes (int)
parm:           agpmode:AGP Mode (-1 == PCI) (int)
parm:           gartsize:Size of PCIE/IGP gart to setup in megabytes (32, 64, etc., -1 = auto) (int)
parm:           benchmark:Run benchmark (int)
parm:           test:Run tests (int)
parm:           connector_table:Force connector table (int)
parm:           tv:TV enable (0 = disable) (int)
parm:           audio:Audio enable (-1 = auto, 0 = disable, 1 = enable) (int)
parm:           disp_priority:Display Priority (0 = auto, 1 = normal, 2 = high) (int)
parm:           hw_i2c:hw i2c engine enable (0 = disable) (int)
parm:           pcie_gen2:PCIE Gen2 mode (-1 = auto, 0 = disable, 1 = enable) (int)
parm:           msi:MSI support (1 = enable, 0 = disable, -1 = auto) (int)
parm:           lockup_timeout:GPU lockup timeout in ms (default 10000 = 10 seconds, 0 = disable) (int)
parm:           fastfb:Direct FB access for IGP chips (0 = disable, 1 = enable) (int)
parm:           dpm:DPM support (1 = enable, 0 = disable, -1 = auto) (int)
parm:           aspm:ASPM support (1 = enable, 0 = disable, -1 = auto) (int)
parm:           runpm:PX runtime pm (1 = force enable, 0 = disable, -1 = PX only default) (int)
parm:           hard_reset:PCI config reset (1 = force enable, 0 = disable (default)) (int)
parm:           vm_size:VM address space size in gigabytes (default 4GB) (int)
parm:           vm_block_size:VM page table size in bits (default depending on vm_size) (int)
parm:           deep_color:Deep Color support (1 = enable, 0 = disable (default)) (int)
parm:           use_pflipirq:Pflip irqs for pageflip completion (0 = disable, 1 = as fallback, 2 = exclusive (default)) (int)
parm:           bapm:BAPM support (1 = enable, 0 = disable, -1 = auto) (int)
parm:           backlight:backlight support (1 = enable, 0 = disable, -1 = auto) (int)
parm:           auxch:Use native auxch experimental support (1 = enable, 0 = disable, -1 = auto) (int)
parm:           mst:DisplayPort MST experimental support (1 = enable, 0 = disable) (int)
parm:           uvd:uvd enable/disable uvd support (1 = enable, 0 = disable) (int)
parm:           vce:vce enable/disable vce support (1 = enable, 0 = disable) (int)
parm:           si_support:SI support (1 = enabled (default), 0 = disabled) (int)
parm:           cik_support:CIK support (1 = enabled (default), 0 = disabled) (int)

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV620/M82 [Mobility Radeon HD 3450/3470] (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. RV620/M82 [Mobility Radeon HD 3450/3470]
        Flags: bus master, fast devsel, latency 0, IRQ 27
        Memory at d0000000 (32-bit, prefetchable) [size=256M]
        I/O ports at d800 [size=256]
        Memory at fdef0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Kernel driver in use: radeon
        Kernel modules: radeon

Answer 1

There is a laptop, the answer is dual graphics. Look for drivers for the Intel video card for your laptop, first install them, and then on the main video adapter