Mikrotik Internet setup on Vlan?

Question

System administration

Hello. There is a MikroTik RB750r2, the Internet is plugged into the first port, a cable to the D-Link DGS-1210 switch is connected to the second port.
11 Vlans are created on MikroTik, they are assigned different subnets and 11 dhcp servers are created. On the switch, each port has its own Vlan (total 11 ports = 11 Vlan), the rest of the ports are untagged, Everything works, the addresses are given out, but there is no Internet in the Vlan ports on the switch, where to look, what to configure? Apparently, somehow it is necessary to register this in the firewall, maybe you need to make Bridge, at the moment I don’t have one and I don’t understand how to do them.
Do I understand correctly that you need to forward Vlan to the 2nd port of MikroTik? those. create bridge1 -> create ether2 port for this bridge -> create Vlan11 port for this bridge -> create Vlan12 port for this bridge -> ... -> create Vlan21 port for this bridge, and then change interface in all Vlans in Ip- >Addresses?
The scheme is almost like this:

Answer 1

In general, I found a cant, I'm just a sucker ..... who cares, the cant is on the 2nd screenshot: in the Ip -> Addresses section, I have all Vlans created by type: 192.168.11. 0/24 and should be 192.168.11. 1/24 Thank you all for your help.

Answer 2

Fixed.
For each interface, enable masquerading in the nat firewall settings.