How to transfer 2 or more local IPs from MikroTik to switch?

Question

Computer networks

Good evening gentlemen. Please tell a beginner how to transfer 2 or more local IPs to a switch from mikrotik and distribute them by ports?

There is a MikriTik RB962UiG5 and a managed switch TL-SG108E. It is necessary to transfer 10.0.20.0/24 to the 2nd port of the switch, 10.0.30.0/24 to the 3rd. So far, I can't. Tried through VLAN + DHCP, VLAN + Bridge, Switch... does not work. I read a lot of topics, but the theory is difficult for me. Tell me please.

Thanks in advance!

Answer 1

I’m not familiar with the switch, but you need to do it using VLAN, of course,
on Mikrotik, on the port that is included in the switch, make two VLANs (then treat them as with a normal interface, i.e. add IP to them, if necessary, start DHCP server for clients, make NAT)
on the switch, make the port that is included in the router trunk (interswitch port is broken by some, tag port, "do not untag" can still be), ports 2nd and 3rd make access ports and include them in corresponding VLANs.
There is a wiki on Mikrotik, there are examples