How to set up management vlan on D-link dgs 1100-06?

Question

D-Link

There is a D-link dgs 1100-06 switch, I connect to it with a patch from a computer, by default with 1 vlana I configure all subscriber ports to the necessary Vlans and so on. I save the configuration, the UP link works, subscribers go to the necessary Vlans, all settings are saved, everything is fine.
But now I need to configure the Management Vlan, not when I have not encountered this. I set the necessary Vlan management in the settings and immediately I lose connection with the switch since I changed the control Vlan from the default 1 to the 200 I need. Accordingly, I could not save the configurations and after turning off the switch the settings are lost and the vlan management is again reset to default 1. Actually how to be? How to save it? Since I need to turn off this switch anyway and install it in another place.
Or maybe you need to immediately install the switch in the right office, configure all the settings on the spot, and then, since the switch did not reboot, log in from the central office (where, by the way, management Vlans are already registered on all switches, but not by me) and only then save the configuration?

Answer 1

VLAN Configuration on D-Link Switches

spoiler

https://drhellp.wordpress.com/2012/11/26/%d0%bd%d0...

Answer 2

Plug into the port you assigned mgmt vlan to, connect to the switch and save the config