How to set up HP 1910 (jg538a) correctly?

Question

network hardware

Good afternoon!
I can not understand.
1. HP with default settings, I only change the ip address on the vlan 1 interface for management. While they are in my office, everything is OK, as soon as they are taken to the object, the ip is visible but I can’t access it or it’s not visible at all. Connected to mikrotik, in mikrotik the ports are separated by different subnets. For example, the 2nd port 192.168.1.1 (ip hp 192.168.1.2) 3rd 192.168.2.1 (ip hp 192.168.2.2)... I scan the network using mikrotik, all devices are in place, there is no vlan management hp. Tell me what is the reason?
2. Is it possible to transfer management from vlan1 to another?
3. How to implement a separate management vlan between mikrotik 2011 and hp 1910?

Answer 1

Resolved by resetting. On sw hp gateways were not specified. Those sw that stopped pinging mysteriously went to the default ip. Now everything is ok! Ilyas, thanks for the quick replies!

Answer 2

1. In which vlan did you set up hp management?
2. possible
3. create a vlan interface on Mikrotik and put it on a specific port, create an ip on it. also on hp, there is a sh vlan command, the current management vlan will be indicated there, set to the desired

Answer 3

Port of the bitch to which microt is connected, vlan 1 untagget, or tagget? If not tagged, then microte vlan does not need to be configured. If it responds to pings from microtik, then try telnet or ssh from it, if it works, then look at the routing rules on mikrotik, nor the firewall at the same time.

Answer 4

Friends, poke your nose. (I ask without maxims like: "Google" to help, "offsite" will tell and show, etc.) Actually, the question is, we need detailed information on the hp 1910 24 jg538a webmord. Interested in "organs" of control and what can be edited through this (webmord)