How to quickly solder a connector?

K

king22012-07-04 23:57:59

Do it yourself

king2, 2012-07-04 23:57:59

There is a need to quickly solder a large number of connectors (and therefore quickly).

The connectors are ordinary, such as PLD-26, that is, 26 legs, and there are 400 of them that need to be soldered.
Now I’m soldering, on the one hand with a soldering iron, on the other hand, I supply solder with flux, so for one contact it turns out about a second and a half.

There is a relatively powerful soldering iron, there is paste and solder, there is a flux.

Are there any technologies that could simplify the process?

Reply

Answer the question

In order to leave comments, you need to log in

5 answer(s)

L

lamamer, 2012-07-05
@lamamer

Sting "miniwave"

K

kaladhara, 2012-07-05
@kaladhara

a) bath with solder, soldering by dipping
b) smear the legs with solder paste and the entire batch of boards (well, or how many of them fit there) in the oven
c) hire a couple of female students for manual soldering

S

ShadowHacker, 2012-07-05
@ShadowHacker

Chinese couple :3

C

CyberLab, 2012-07-05
@CyberLab

If you are interested in soldering technology, then this technology is called "Wave"

W

woddy, 2012-07-05
@woddy

26 x 400 x 1.5 = less than 5 hours of operation. cook everything and solder.
in about "students" you were correctly told. in small-scale production, this is the cheapest option.