How to install win 10 on ssd m2?

Question

Windows

This has never happened before, and here again ©
It seems that I did not consider myself a lamer, but then I reached a dead end. Samsung 970 Evo series 250GB M.2 PCIe 3.0 x4 V-NAND TLC (MZ-V7E250BW)
installed it in my MSI Z170A-G43 Plus (MS-7970) motherboard, checked the speed of the branded crystal disk, started installing win 10, at first there was a problem with the installation of ssd m2 with disk 0, in order to create the boot sectors correctly, pulled out the remaining disks that are there, standardly Windows marked the sectors that it needs, the installation was successful and ... when booting, it gave this
b1initializelibrary failed 0xc000000e
tried diskpart to make GPT, tried to write a flash drive with Windows otherwise, I tried to change the SATA mode to PCIe, I don’t know where to dig anymore, what kind of beast is this, how to make it work?

Answer 1

a rather unusual problem, everything was solved by updating the bios, thanks everyone for the tips

Answer 2

didn't help me

Answer 3

There was such a problem, then Windows did not want to put an error on the installation, climbed out, then the installation was completed, Windows did not start! Everything was decided, I formatted it with Acronis, and I wrote down the iso ultra flash drive, I inserted the USB flash drive into the usb 2.0 port and voila, everything took 10 minutes and Windows started up! Roofing felts in Rufus problem Roofing felts in Windows factory formatting is not right!