How to get Cisco 7206 out of romon> mode?

Question

Cisco

Greetings.
Not how I can not get cisco 7206 out of romon mode. Maybe someone has come across this problem.
below info about flash:
rommon 7 > meminfo
Main memory size: 512 MB.
Shared memory size: 1 MB
Main memory size: 0x20000000
Available main memory starts at 0xa000e000, size 0x1fff2000
NVRAM size: 0x20000
Parity Map for the DRAM Banks
rommon 2 > dev
Devices in device table:
id name
bootflash: boot flash
slot0: PCMCIA slot 0
slot1: PCMCIA slot 1
disk0: PCMCIA slot 0
disk1: PCMCIA slot 1
eprom: eprom
-------------------------------- ----------
rommon 6 > dir disk1:
Initializing ATA monitor library.......
Directory of disk1:
2 27926652 -rw- c7200-adventerprisek9-mz.1222-33.SRD4.bin
----------- -------------------------------------------------- --------------------------------------------
rommon 8 > set
PS1=rommon ! >
WARM_REBOOT=FALSE
BOOT=disk0:c7200-adventerprisek9-mz.152-4.M5.bin,12;
RANDOM_NUM=782807036
RELOAD_TYPE=1
IOMEM_SIZE=
BSI=0
RET_2_RTS=00:00:16 UTC Mon Mar 1 1993
RET_2_RCALTS=730944000
CRASHINFO=crashinfo_FAILED
?=0
Thanks in advance!

Answer 1

The issue is closed, the problem was in a non-working ethernet board. After removing the board, everything worked.