How to forward a subnet to a client (repeater) in OpenWRT?

Question

Network administration

There are 2 routers with firmware OpenWRT 15.05 (latest)
1st - "host". IP: 192.168.0.1, DHCP enabled
2nd - "client" repeater. IP: 192.168.0.2, DHCP is enabled
1st - WAN is connected to it. Also, a mini- server IP 192.168.0.104 (static)
is connected to it with a wire . (phone, macbook, winbook) - I can't connect to the web face of the first one (192.168.0.1), and to the server (192.168.0.104). Although in fact - both routers are on the same subnet (here I may be wrong)

I tried to turn off DHCP on the second router, make various bridges, but the result was not achieved (it was always difficult with routing)

Answer 1

Although in fact - both routers are on the same subnet (here I may be wrong)

No, not in one. On the second router, you most likely have NAT.
DHCP should definitely be one.
Here's an article on how to do it. Please note that there are two cases, depending on the chipset.
In general, you need to use not the term "client-repeater", but WDS, and then everything will fall into place, including in Google .