How to disable the firewall on Openwrt firmware?

Question

Network administration

Salute dear. Without thinking, I turned on the firewall on the internal network in my router. Now the piece of iron only responds, neither the webadminka nor telnet can reach out, we tried to hook it up through Wi-Fi and wire. All firewall rules are default. Hardrezet tried (hold the reset button for several seconds) - nothing worked. Who faced? how to win?

Answer 1

Depends on the router. In some models, with some sequence of switching on and buttons on the router, enter the bootloader. which allows you to reflash the subject. In some others, only through com-port, there may be “bricks”. According to the topic it is absolutely impossible to understand wft, we are not telepaths.

Answer 2

“Hard reset” on OpenWRT is recommended to be done according to the scheme 30-30-30:
1. Hold the reset for 30 seconds
2. Without releasing the reset, pull out the power of the router, wait 30 seconds
3. Without releasing the reset, turn on the power, wait another 30 seconds
4. Release the reset

Answer 3

uncheck Enable SYN-flood protection
and the firewall in openwrt is iptables

If you need to open the port, then Firewall - Port Forwards