How to configure Fortinet AP221b?

Question

network hardware

There is a Fortiap-221b access point, how to connect to it in order to configure it. What is the IP web of the muzzle, or via telnet connection. You need to do the initial setup. and more stable), and on 941 we turn off wifi (it works as a router). When connecting the point directly to the computer, the result 0.IP used both 192.168.1.3 and 176.16.0.1. Tell me which way to dig, or does it only work with fortigate in conjunction?

Answer 1

I dropped the point via telnet using putty and the address 192.168.1.2 I installed fortiexplorer, but it does not see the point. Through the browser at the address 192,168,1,2, just a stub pops up 221b with statistics without the ability to make changes.
P.s The experiment is over to configure the point, you need a fortigate controller or without it through the forticloud cloud. But to configure via the cloud (configuration, point firmware), you need a firmware version of at least 5, I have 4. You can update this firmware version only through the controller. I found fortigate 30b is incompatible.
Experiments with a piece of iron are stopped.
thanks for the help

Answer 2

First, reset the point to default settings and try using a network with DHCP and FortGate software. The point itself does not have a web interface, it has only telnet.