How do huawei routers choose between two equivalent routes to the same network?

Question

Huawei

Good afternoon.

There is a cofnig where two routers will announce a route to the subnet via bgp. Route masks are different. This is how a remote bgp peer sees these announcements:

95.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
B        95.173.156.0/28 [20/1] via 10.10.10.1, 04:07:36
B        95.173.156.13/32 [20/1] via 10.10.10.2, 01:42:43

In the ciscus documentation I read:

If the destination matches more than one entry in the routing table, then the packet is forwarded out of the interface associated with the route that has the longer network prefix length.

So the packages will always fly to 10.10.10.2.
But in the routing manual, Huawei did not find a description of how this will work out. Connoisseurs, tell me? At hand there is only a tsiska, I can not check it empirically.

Answer 1

A packet to 95.173.156.13 will always go to 10.10.10.2
Packets to 95.173.156.0/28 (except 95.173.156.13) will go to 10.10.10.1

Answer 2

If it opens, but it is impossible to copy-paste, then we print it to a file and recognize it from Finereader.

Answer 3

If you can’t recover the password using this method, then I can advise you to search the Internet for online services that allow you to remove the password from the pdf file. There are such online services, I think you will find them without problems, I had to use them: https://recoverytoolbox.com/en/pdf_password.html