How are routing between Vlan configured on mikrotik CRS326-24-2S?

Question

network hardware

3 Vlanas (Vlan 2, Vlan 3, Vlan 4 ) were created on mikrotik CRS326-24-2S, the corresponding bridge_vlan2,bridge_vlan3,bridge_vlan4 were created. Users each work in their own Vlan. How to configure routes so that users on Vlan3 have access to Vlan 2 and Vlan 4

Answer 1

In the current configuration, hw-offload probably does not work for you. Reconfigure with one bridge following the wiki example.
https://wiki.mikrotik.com/wiki/Manual:Interface/Br...

Answer 2

If you did everything right, assigned addresses to the bridges, and there are no deny rules in the firewall, everything should work without additional routes

Answer 3

Firstly, you don’t need to produce bridges for VLANs
https://wiki.mikrotik.com/wiki/Manual:CRS3xx_serie...
Secondly, an L3 switch from CRS is like that, you won’t get more gigabit at all. And so add interfaces to the VLAN bridge, prescribe addresses and rejoice

Answer 4

Tell me a:
It means that the packets go back and forth as:
VLAN3 <--> VLAN2
u
VLAN3 <--> VLAN4
u
VLAN2 X VLAN4
So ??