Creating a taxi application for a taxi fleet, how to choose the right technology?

Question

Android

Доброго времени суток,на работе появилась задача создать приложение для таксопарка.(клиент кидает заказы,водитель может их выбирать итд).
В голове сразу: Взять андроид студио,учебники по java и начинать строить приложение с кучей болячек.
Сам в какой-то степени владею php\html+css.
Видел на ютубе закидывали в apk содержимое сайта(html) и оно нормально отрабатывало(вроде).
Есть ли какие-то не традиционные пути для реализации этого? Как бы поступили бы вы?

Answer 1

Well, do it as they wrote
. In 3-4 years you will get something sane

Answer 2

The problem is that computers connected by cable directly to the main hub see each other and are networked. And the computers connected to the second router are isolated from the main network and see only each other, but do not see the rest.

The DIR-300 most likely gets an IP address for the interface it's connected to the switch (which you call a "hub" for some reason) and then uses that as the external address for NAT. If you want all computers on the network to "see each other", then the simplest solution, in my opinion, would be to configure the DIR-300 as a bridge. Bridging must be configured between the interface by which it is connected to the switch (presumably the WAN port) and the rest (LAN and WLAN/WiFi) interfaces. In some "home" routers, this mode is called "access point mode". If you use such a solution, just in case, do not connect one host (computer, monoblock) with different interfaces (Wi-Fi / LAN) at the same time.
You can also configure routing on the DIR-300, but in this case, in my opinion, more nuances will come to light.

Answer 3

you can change the network mask 255.255.254.0 on two routers, or use the DIR-300 as a hub, just insert the wire from the 24-port DIR-300 to the lan

Answer 4

Replace the second long link with a five-port switch for two hundred rubles or make it such with switches in the admin panel.