Cisco 7942 phone not registering with Asterisk?

Question

Asterisk

Hello everyone, there is a cisco 7942 phone, I wrote the config for SIP and wrote the firmware, can someone tell me why it does not register, that is, it does not spit anything even into the asterisk console, here is the config

spoiler

Конфиг

<device>
    <deviceProtocol>SIP</deviceProtocol>
    <ipAddressMode>0</ipAddressMode>

    <devicePool>
        <dateTimeSetting>
            <dateTemplate>D.M.Y</dateTemplate>
            <timeZone>Russian Standard/Daylight Time</timeZone>
            <ntps>
                <ntp>
                    <name>10.0.0.47</name>
                    <ntpMode>Unicast</ntpMode>
                </ntp>
            </ntps>
        </dateTimeSetting>
    <loadInformation>SIP42.8-5-4S</loadInformation>
    <loadInformation434  model="Cisco 7942">SIP42.8-5-4S</loadInformation434>
        <callManagerGroup>
            <members>
                <member priority="0">
                    <callManager>
                        <ports>
                            <ethernetPhonePort>2000</ethernetPhonePort>
                            <sipPort>5160</sipPort>
                        </ports>
                        <processNodeName>10.0.0.221</processNodeName>
                    </callManager>
                </member>
            </members>
        </callManagerGroup>
    </devicePool>

  <userLocale> 
    <name>Russian_Russian_Federation</name> 
    <uid></uid> 
    <langCode>ru_RU</langCode> 
    <version>8.4.3.1000-1</version> 
    <winCharSet>utf-8</winCharSet> 
  </userLocale>
  
    <sipProfile>
        <sipProxies>
            <registerWithProxy>true</registerWithProxy>
        </sipProxies>
        <sipCallFeatures>
            <cnfJoinEnabled>true</cnfJoinEnabled>
            <rfc2543Hold>false</rfc2543Hold>
            <callHoldRingback>2</callHoldRingback>
            <localCfwdEnable>true</localCfwdEnable>
            <semiAttendedTransfer>true</semiAttendedTransfer>
            <anonymousCallBlock>2</anonymousCallBlock>
            <callerIdBlocking>2</callerIdBlocking>
            <dndControl>0</dndControl>
            <remoteCcEnable>true</remoteCcEnable>
        </sipCallFeatures>

        <sipStack>
            <sipInviteRetx>6</sipInviteRetx>
            <sipRetx>10</sipRetx>
            <timerInviteExpires>180</timerInviteExpires>
            <timerRegisterExpires>3600</timerRegisterExpires>
            <timerRegisterDelta>5</timerRegisterDelta>
            <timerKeepAliveExpires>120</timerKeepAliveExpires>
            <timerSubscribeExpires>120</timerSubscribeExpires>
            <timerSubscribeDelta>5</timerSubscribeDelta>
            <timerT1>500</timerT1>
            <timerT2>4000</timerT2>
            <maxRedirects>70</maxRedirects>
            <remotePartyID>true</remotePartyID>
            <userInfo>None</userInfo>
        </sipStack>

        <autoAnswerTimer>1</autoAnswerTimer>
        <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
        <autoAnswerOverride>true</autoAnswerOverride>
        <transferOnhookEnabled>false</transferOnhookEnabled>
        <enableVad>false</enableVad>
        <preferredCodec>g711ulaw</preferredCodec>
        <dtmfAvtPayload>101</dtmfAvtPayload>
        <dtmfDbLevel>3</dtmfDbLevel>
        <dtmfOutofBand>avt</dtmfOutofBand>
        <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
        <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
        <kpml>3</kpml>
        <natEnabled>false</natEnabled>
        <phoneLabel>Mehanika</phoneLabel>
        <stutterMsgWaiting>0</stutterMsgWaiting>
        <callStats>false</callStats>
        <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
        <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
        <startMediaPort>10000</startMediaPort>
        <stopMediaPort>20000</stopMediaPort>

        <sipLines>
            <line button="1">
                <featureID>9</featureID>
                <featureLabel>10400</featureLabel>
                <proxy>10.0.0.221</proxy>
                <port>5060</port>
                <name>10400</name>
                <displayName>10400</displayName>
                <autoAnswer>
                    <autoAnswerEnabled>2</autoAnswerEnabled>
                </autoAnswer>
                <callWaiting>3</callWaiting>
                <authName>10400</authName>
                <authPassword>My_Pass</authPassword>
                <sharedLine>false</sharedLine>
                <messageWaitingLampPolicy>1</messageWaitingLampPolicy>
                <messagesNumber>10400</messagesNumber>
                <ringSettingIdle>4</ringSettingIdle>
                <ringSettingActive>5</ringSettingActive>
                <contact>10400</contact>
                <forwardCallInfoDisplay>
                    <callerName>true</callerName>
                    <callerNumber>true</callerNumber>
                    <redirectedNumber>false</redirectedNumber>
                    <dialedNumber>true</dialedNumber>
                </forwardCallInfoDisplay>
            </line>

            <line button="2">
                <featureID>9</featureID>
                <featureLabel>10402</featureLabel>
                <proxy>10.0.0.221</proxy>
                <port>5060</port>
                <name>10402</name>
                <displayName>10402</displayName>
                <autoAnswer>
                    <autoAnswerEnabled>2</autoAnswerEnabled>
                </autoAnswer>
                <callWaiting>3</callWaiting>
                <authName>10402</authName>
                <authPassword>My_Pass</authPassword>
                <sharedLine>false</sharedLine>
                <messageWaitingLampPolicy>1</messageWaitingLampPolicy>
                <messagesNumber>10402</messagesNumber>
                <ringSettingIdle>4</ringSettingIdle>
                <ringSettingActive>5</ringSettingActive>
                <contact>10402</contact>
                <forwardCallInfoDisplay>
                    <callerName>true</callerName>
                    <callerNumber>true</callerNumber>
                    <redirectedNumber>false</redirectedNumber>
                    <dialedNumber>true</dialedNumber>
                </forwardCallInfoDisplay>
            </line>

        </sipLines>

        <voipControlPort>5160</voipControlPort>
        <dscpForAudio>184</dscpForAudio>
        <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
        <dialTemplate>dialplan.xml</dialTemplate>
    </sipProfile>

    <commonProfile>
        <phonePassword></phonePassword>
        <backgroundImageAccess>true</backgroundImageAccess>
        <callLogBlfEnabled>1</callLogBlfEnabled>
    </commonProfile>

    <loadInformation>SIP42.9-4-2SR2-2S</loadInformation>
    <vendorConfig>
        <disableSpeaker>false</disableSpeaker>
        <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
        <pcPort>0</pcPort>
        <settingsAccess>1</settingsAccess>
        <garp>0</garp>
        <voiceVlanAccess>0</voiceVlanAccess>
        <videoCapability>0</videoCapability>
        <autoSelectLineEnable>0</autoSelectLineEnable>
        <webAccess>0</webAccess>
        <spanToPCPort>1</spanToPCPort>
        <loggingDisplay>1</loggingDisplay>
        <loadServer></loadServer>
        <sshAccess>0</sshAccess>
    </vendorConfig>

    <deviceSecurityMode>1</deviceSecurityMode>
    <authenticationURL></authenticationURL>
    <servicesURL></servicesURL>
    <transportLayerProtocol>2</transportLayerProtocol>
    <certHash></certHash>
    <encrConfig>false</encrConfig>
    <dialToneSetting>2</dialToneSetting>

<userLocale> 
  <name>Russian_Russian_Federation</name> 
  <uid></uid> 
  <langCode>ru_RU</langCode> 
  <version>8.4.3.1000-1</version> 
  <winCharSet>utf-8</winCharSet> 
</userLocale>


<networkLocale>Russian_Federation</networkLocale> 
<networkLocaleInfo> 
  <name>Russian_Federation</name> 
  <uid></uid> 
  <version>8.4.3.1000-1</version> 
</networkLocaleInfo>
  
</device>

Answer 1

As far as I remember, it rises, but only on TCP. And it’s not clear from the config, you have 5060 in places (on buttons) and 5160 in places (appears in the proxy section) how your system is configured. Do a tcpdump on those ports on the asterisk to make sure your port/protocol matches.

Answer 2

In general, there are working configs for 7942, 7975 and 7911, if anyone needs to write in a personal, I will send