BSOD, after 10 minutes of inactivity, what to do?

Question

Windows

Good day, the problem is that if the PC is inactive for about 10 minutes, a "blue screen" pops up and you have to restart it manually. This problem started after I installed the bar ssd m3 (SSDPR-PX500-256-80 256.0 GB) Win 11 costs, license, installed from the off site, using the bootloader method on the USB flash drive, after the problem appeared, there was an attempt to roll back the system, reinstalling Windows, but it didn't help. In general, the PC works fine, but if the system is not loaded with anything, let's say the current started the PC, then again after about 10 minutes, a sad smiley pops up :(, at least take something to load the system a little all the time, maybe to mine a cue ball or something?) ))), but
no kidding, sometimes annoying

Answer 1

The problem started after installing the bar ssd m3

You have iron from the future!
Obviously something as old as Windows 11 doesn't support it.

there was an attempt to roll back the system, reinstalling Windows, but it did not help

And without this SSD everything works fine? Those. Have you isolated the problem and are you sure it's the new drive?

SSDPR-PX500-256-80

In general, taking into account the fact that this is a Goodram SSD, it is not known on the basis of which memory chips (and what quality) it is assembled.
To get started, check out its SMART in R.tester: https://rlab.ru/tools/rtester.html
You can also run a reading test and look at the speed graphs. This will give an understanding of the quality and condition of the NAND.
And if there is no important data on this solid state, then also run a write test (it destroys everything) for the same purpose.

Answer 2

What is the actual error code?