Answer the question
In order to leave comments, you need to log in
Answer the question
In order to leave comments, you need to log in
More than just a link:
asterisk.ru/knowledgebase/books
+ Look at the knowledge base there. And of course real experience...
www.asteriskdocs.org/ books
Asterisk : The Definitive Guide, Asterisk Cookbook
, Elastix without tears over communication and not only over VoIP
Description of commands and functions of version 1.8 on the resource: wiki.asterisk.org/wiki/display/AST/Dialplan+Applications
asterisk-pbx.ru/wiki/doku.php/asterisk - the best site about Asterisk in Runet.
I also advise you to immediately raise the virtual machine and put a bare asterisk there (without web snouts) and try what is written!
I recommend going the following way:
1. Familiarize yourself with the structure of Asterisk, the dialplan language, configuring trunks and internal subscribers, and call routing. You need to do this on a bare Asterisk.
2. Install different builds and try them out: FreePBX Distro, Askozia, Elastix.
3. Rent a direct number via SIP, for example, on ipport.net, connect it to Asterisk with or without a face.
4. Buy an IP phone, such as the Cisco SPA-303, and also experiment with its connection.
And on the subject to read: www.voxlink.ru/contacts/community.html
First, read the basics of VOIP theory, then understand the asterisk handbook + labs, that is, the practice of setting
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question